Empty 5gal Tank
Part# LS1130

This quick-change tank system for the Ossian LS® is intended to speed the process of refilling your LS sprayer while maintaining flexibility to carry additional product from job site to job site. The quick change system also allows the tank to be removed, significantly reducing the weight of your unit when lifting into or out of a vehicle.

FOR PROPER USE OF THE 5 GALLON PRODUCT TANK, FOLLOW THE VISUAL INSTRUCTIONS BELOW.

Alert-smgreyUnapproved chemicals will void Ossian LS® warranty.

siphon-install_r2_c1

siphon-install_r1_c2

siphon-install_r1_c3

  1. Attach siphon cap to full tank of Ossian approved anti-icer. Hand tighten.

  2. Install full anti-icer tank into tank cavity of sprayer with cover of unit closed.

  3. Plug female connection on siphon hose into male inlet port in back of tank compartment.
    Apply gentle back and forth twisting motion.

  4. When removing tank, unplug female connection on siphon hose from base unit prior to lifting tank.

WARNING

  • Use proper lifting technique when lifting full liquid tank or injury could result.

  • DO NOT attempt to open cover prior to removing tank. Always remove tank properly before opening cover.