INTENSE® LIQUID DEICER

DOWNLOAD LITERATURE
DOWNLOAD SAFETY DATA SHEET
  • Superior Melting Performance

  • FUSION® Bio-based additive

  • Pre-treating salt dramatically increases melting

  • Highly effective on roads and parking lots

  • Superior Melting Performance

  • FUSION® Bio-based additive

  • Pre-treating salt dramatically increases melting

  • Highly effective on roads and parking lots

Performance:

INTENSE® Liquid De-Icer applied to sidewalks and traffic areas prior to a storm, prevents the bonding of snow and ice to the surface. Preventing this bond means less labor is required for snow removal afterwards. INTENSE® is an exceptional pre-wet treatment for salt, increasing melt performance in both speed and lower temperatures.

 

Reduce Costs / Reduce Labor:

Liquid anti-icers applied ahead of a storm, reduces overtime and after storm cleanup. INTENSE® Liquid De-Icer prevents the bonding of snow and ice to the pavement surface allowing easier removal with blade or shovel. INTENSE® applied prior to a storm can reduce or eliminate after storm cleanup and granular de-icer use, saving both material and labor costs.

 

Safe for Concrete and Vegetation:

INTENSE® will not harm concrete and vegetation when used according to label instructions. INTENSE® contains no added magnesium chloride which has been shown in studies to chemically attack concrete. Incorporating liquid anti-icing practices with dry application rates is essential to reducing chloride and salt impacts on the environment.

 

Directions:

ANTI-ICING: On a cleared surface apply 1 gallon per 1000 square feet. Application rates may vary based on conditions. Apply 1 – 2 hours prior to snow fall. If snow is expected during the evening, product may be applied at dusk to aid in the removal of snow in the morning.

DE-ICING: Plow or shovel snow accumulation prior to applying product at a rate of 1 – 2 gallons per 1000 square feet. Applications rates vary depending on snow / ice depth and temperature conditions. In snow deeper than two(2) inches, all deicers are impractical.

DO NOT apply when the surface temperature is Below 10°F. At lower temperatures, apply TRIPLE MELT® dry ice melter. Liquid de-icers are not a replacement for granular deicers and should be used in conjunction.

Powered by our Bio-based Accelerator:

Treated with Patented Coating Agent Fusion

TECHNICAL INFORMATION
Principal Application Anti-icing prior to storm
Color Dark Amber (non-staining)
Composition Calcium Chloride
Fusion® Bio-based additive
Packages Available 250gal / 4500gal