Siphon Cap / Tank Inlet Hose
Part# LS1004

The threaded cap of the inlet hose ONLY fits 5 gallon dense pack tanks sold with the Ossian LS® or purchased separately from Ossian Inc. or an authorized supplier.

FOR PROPER USE OF THE 5 GALLON PRODUCT TANK, FOLLOW THE VISUAL INSTRUCTIONS BELOW.

Alert-smgreyUnapproved chemicals will void Ossian LS® warranty.

siphon-install_r2_c1

siphon-install_r1_c2

siphon-install_r1_c3

  1. Attach siphon cap to full tank of Ossian approved anti-icer. Hand tighten.

  2. Install full anti-icer tank into tank cavity of sprayer with cover of unit closed.

  3. Plug female connection on siphon hose into male inlet port in back of tank compartment.
    Apply gentle back and forth twisting motion.

  4. When removing tank, unplug female connection on siphon hose from base unit prior to lifting tank.

WARNING

  • Use proper lifting technique when lifting full liquid tank or injury could result.

  • DO NOT attempt to open cover prior to removing tank. Always remove tank properly before opening cover.

For proper use of the siphon cap, watch video below.
Video has NO AUDIO.