Return Home

CMA100

 

Ossian's CMA100 is 100% Calcium Magnesium Acetate (CMA). Its primary use is an ice melter on parking ramps to reduce corrosion to the embedded concrete re-bar. Ice guard is designed for applications where corrosion or environmental issues are of concern.

LOW CORROSION                     About as corrosive as tap water.
SAFE FOR CONCRETE                 No more damage than from water.
EXCELLENT INHIBITOR              Reduces chloride corrosion.
ENVIRONMENTALLY SAFE          Low toxicity and biodegradable.
RESIDUAL EFFECT                      Requires fewer applications.

 

 

 

Product Information

When mixed with snow, CMA100 interferes with the ability of snow particles to adhere to each other or to the surface. It does not create a flowing brine like salt, but keeps the snow lighter and drier improving traction. Applied early in the storm, Ice Guard prevents the formation of snow pack and the bonding of ice to the pavement surface, so plow, broom or shovel can remove snow and ice more easily.

Independent laboratory testing shows the components of  CMA100 do not chemically attack good quality concrete that has been designed for exposure to winter weather and ice melter usage. However, the natural cycle of freezing and thawing of concrete by winter conditions can cause scaling damage to concrete. The use of any ice melting agent can increase these natural freeze/thaw cycles. Particularly vulnerable are those concrete surfaces in which sub-standard practices were used in the formulation, placement, finishing and/or curing stages of construction. Also vulnerable are all concretes that are less than one year old, precast steps, masonry (stone or brick), existing concrete that has exposed aggregate, is precast, prestressed, chipped, cracked, spalled, or weathered. The use of any ice melter on these types of surfaces is not recommended, and therefore can only be done at the user's own risk.

To minimize potential damage use CMA100, and any other ice melting product, on only "quality concrete that is air entrained, mixed, place and cured according to recommendations of American Concrete Institute Committee 201. The potential for damage to concrete surfaces can also be decreased by sealing surfaces and by removing slush that results from melting.

Ice melting agents applied at much greater rates than recommended may interfere with traction or footing. When using any deicer, good housekeeping practices and use of outside mats and inside "walk-off" mats are encouraged for optimum safety and minimal impact on floor coverings.

When grass and shrubbery are adjacent to icy surfaces, particular care should be used to avoid excessive or repeated application, as it could cause damage. The use of this ice melting compound must be at the consumer's risk.

Warnings: Causes eye irritation - May cause skin irritation - May be harmful if swallowed

Avoid contact with skin or clothing. Do not take internally. Wash thoroughly after handling.

First Aid:  Eyes- In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses if worn. Get medical attention.

Skin- In case of skin contact, flush skin with plenty of water. Get medical attention if irritation persists. Remove contaminated clothing. Wash clothing before reuse.

Swallowed- If large quantities are swallowed, get medical attention. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

 

www.ossian.com

 

 

Ossian Inc. has been developing and manufacturing high performance ice melters since 1974. Based in the heart
of the U.S. snowbelt, Ossian operates the most active private de-icing lab in the United States, working to reduce
our country's dependency on salt and pioneering alternative de-icing technology.
icemelt@ossian.com
563-324-3381